Showing posts with label stencils. Show all posts
Showing posts with label stencils. Show all posts

04 June 2022

Here We Go Again...

Hello Crafty Peeps - a big thank you for stopping by.

Well, it's been a while - there's been a lot of life going on in the background these last few months and I have also been exploring some other styles of card making. But I am now back in Altenew mode and I'm happy to see you at the start of my AECP Level 3 journey. 

If you have followed my blog or social media posts, it will come as no surprise that my first class has been 'Stunningly Styled Stencils', led by the very talented Jenny Colacicco and LauraJane Head. I love stencils and I have used them a lot in my AECP projects. They are an easy way to add interest to a card, or a quick way to add colour to a stamped image. 

For this project I was inspired by lesson 5, 'Stencil Printing' - all the product details, etc., are listed below, as always. Unless otherwise stated, all products are from Altenew.

Card One


I wanted to start by using a stencil in the usual way and then seeing what print I could get from the left over ink. I started out with a piece of coloured/patterned paper - a beautiful clouded green paper from my stash, below. Using a coloured/patterned paper as a base gives a whole new look to the finished design. I used the Leaf Bed stencil and a combination of Green Opal and Green Onyx Crisp Dye Inks (from the Jewel Tones Crisp Dye Ink Set) to make a beautiful deep background paper.


Before wiping the ink off the stencil, I spritzed it with water and placed a piece of watercolour paper over it, pressing down well to pick up the wet ink. You can see the background on the left and the stencil print on the right. 

I made the first card with the dark green background and the Build-A-Flower Honeysuckle Stamp and Die set, with the inks shown in the picture below.



I love these soft peachy tones against the dark background. I cut a few leaves from metallic gold card to add a little shine and mounted the flowers on some foam tape. I completed the card with a foiled sentiment from the Spellbinders Hot Foil Glimmer Place Everyday II set and some gold gems from Little Things from Lucy's Cards.

Card Two


This card is completely different and uses the stencil print I took at the end of creating the background for card one above.


I think the print turned out well and makes a beautiful and subtle background for this card. I used the CZ Design Swoopy Thank You die set for the sentiment and coloured a piece of card with Green Onyx ink to cut for the background. I finished with some dots of Cosmic Twinkles and Nuvo Crystals.

The sentiment is from the Sentiment Strips 2 set but the original sentiment was too long for where I wanted to place it on the card. I tried stamping it and cutting it up, but it looked odd as the spacing didn't work. So I stamped it in two parts by covering the part I didn't want to stamp with washi tape, inking up the remainder, removing the tape and then stamping the inked words - I did this twice to achieve the sentiment on the card.

Card Three


Of course, I couldn't stop there. I wanted to see what the result would be if I intentionally inked up a stencil to take a print so I used one layer of the Deco Diamonds stencil and inked it up with Hickory Smoke, Faded Jeans and Tumbled Glass Distress Inks, to create a sort of ombre effect, then laid over a piece of watercolour paper (for the thickness and softness of the paper, rather than its water-absorbing properties) and ran the whole thing through my Spellbinders Platinum. The end result was a dry embossed and printed background, perfect for a masculine card. What you can't see in the photograph, unfortunately, is the embossing - it really gives a lovely texture.


I used a sentiment from the Note for You stamp set and stamped it in dark blue, to coordinate with the background. I don't know where the die is from, I'm afraid - it has been in my stash for sooo many years.

The effect is quite watercolour-ish, because I used Distress Inks, which don't lie on the surface of the stencil as opaque colour. 

Cards Four and Five


For the next example, I used Distress Oxide inks, and you will see how well they stick to the stencil and what a vibrant print they give. 

I chose the Henna Square stencil and Wilted Violet, Salty Ocean, Mowed Lawn, Fossilised Amber, Carved Pumpkin and Picked Raspberry Distress Oxide inks. After inking up the stencil, directly with the ink pads, I placed a piece of Neenah 80lb paper over to pull the print. This time, I simply rubbed over the back of the paper to pick up the ink and it worked remarkably well:


As there was still plenty of ink left on the stencil after taking the first print, I spritzed with water and lifted another print, which was a beautiful, pale copy of the first.

And, just to make the most of all the ink I had used, I also spritzed the ink left on my mat and ink and blotted it up with a spare piece of watercolour paper, which I will keep to use in a future card.

The boldness of the initial print was stunning but I wasn't sure how best to use it. Then it came to me - much like the original stencil has cut away bits, why didn't I cut away some of the white space to emulate this? So that's what I did:



The gold 'birthday' is the Let's Have a Word: Birthday die from The Greetery and the subsentiment is from Sentiment Strips 2. I think cutting away some of the white and mounting it all on foam pads gives a whole new look to the finished print. A few gold gems finished it off. 

The pale 'shadow print' needed something much softer, which is not my usual style at all. So, I used the Beauty Within stamp set and stamped this in Faded Jeans Distress Ink. I stamped it several times, so that I could use elements to cut out and mount on foam pads, to give a 3D effect. I took my water brush and used the ink in the image to pull some pale colour into various parts of the flowers. I then cut and mounted the extra flowers and was quite pleased with the gently coloured outcome:



I used the largest die from The Greetery's Nordic Frame die set to trim down the background panel and give some interest around the edge. The panel is mounted onto gold card (not much shine in the photograph, I'm afraid) and then onto a pretty pale pink card from my stash, to complement the pastel colours in the background print. I added just a few sparkles to finish.

Of course, I couldn't resist using the stencil in the traditional way, just to show you how it looks against the other examples:


Three very different results from one stencil - what a great technique!

I will definitely use this technique again. It is great for subtle backgrounds and allows you to actually use the negative of the stencil in a creative way. 

Thank you for spending time here, Peeps, your support is much appreciated. 

Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog. 



br />





12 September 2021

AECP 2 - Final Challenge Part 2

Hi Crafty Peeps - welcome to Part 2 of my AECP Level 2 Final Challenge post. You can read Part 1 here. 

As a reminder, the first part of the final challenge was to create four masculine cards for various occasions throughout the year and this is the second part - to repurpose/recycle or alter.

Upcycled/Repurposed Item

Our house is full of potential repurposing things and I often repurpose boxes into pretty gift boxes, particularly at Christmas as it is always wonderful to give and receive a beautifully presented gift, don’t you think? But I chose to recycle the case of an old, much-loved but damaged CD.

This is a desk calendar – ‘A Year of Flowers’ – and it sits in the CD case beautifully.

My first challenge was to set up the pages so that I could print the calendar month and a motivational/ thoughtful/funny quotation on each page. I use MS Publisher when need to lay out a page accurately – I find it works better than Word. 

I measured the inside of the CD lid, which came to 12 cm x 14 cm, so I wanted my pages to be 11.8 cm x 13.8 cm, so that I had a little wriggle room when sliding them in and out of the lid. In order not to waste paper, I set up two calendar pages on one sheet of paper and made sure that I was consistent with placement, headings, fonts, etc., throughout. 

You can see how the pages were set out in this screenshot.

Once I was happy I printed the pages onto Make It Colour card – it is so smooth and I love how it takes ink and markers and pencils.

In order to deliver a year of flowers, Mr Google and I worked at finding a list of birth month flowers and came up with the following (plus a note of the stamp sets and stencils used for each page):

January - carnation and snowdrop (Pen Sketched Flowers and Narrow Brick Stencil)
February - violet and primrose (Build-a-Flower: Sweet Violet and MFT Wavy Lines Stencil)
March - daffodils and jonquils (Paint-a-Flower: Daffodil and Deco Wallpaper Stencil)
April - daisy and sweet pea (Spring Daisy and Fine Tulle Stencil)
May - lily of the valley and hawthorn (Fairy Tale Florals and Fine Tulle Stencil)
June - rose and honeysuckle (Enchanted Roses and Grid Stencil)
July - larkspur and waterlily (Build-a-Flower: Cattleya and Fine Tulle Stencil)
August - gladiolus and poppy (Airbrushed Flowers and Deco Wallpaper Stencil)
September - aster and morning glory (Build-a-Flower: Aster and Grid Stencil)
October - marigold and cosmos (Stunning Cosmos and Narrow Brick Stencil)
November - chrystanthemum (New Beginnings and Narrow Brick Stencil)
December - narcissus and holly (Build-a-Flower: Poinsettia and Mighty Corners Stencil)

I had some of these flower stamps already and some that could masquerade as others, so I pulled them all out of my stash and got to work. December didn't get her holly, tho!

I also chose several of my stencils, as I knew I would need them for background interest. I tried to choose quite geometric patterns as a foil to the softness and prettiness of the flowers, as I didn’t want the pages to look too fussy. I also pulled out my roll of Judikins masking paper, as I could tell there was lots of masking ahead! And I think this shows my dedication to fussy cutting!

I cut an oblong mask to mask the calendar part of the page, as I didn’t want any colour over this. Then I stamped around the page, masking where necessary, and masking everything before stencilling the background. 

Once done, I added colour to the flowers in a combination of layers of the layering stamp, Copic markers and coloured pencils.

There’s a little photo-story below of making one of the pages, so that you can see my process:

  • mask the month
  • stamp and mask the flowers
  • stencil over masked page
  • remove stencil and all masks to reveal finished page.

Tip:

Even if you are using a layering stamp set, you can add extra depth and detail with your favourite colouring medium. I used Prismacolor pencils over some of my final images to strengthen the shadows or deepen a colour I felt was a little too light. You can see the difference this has made in the Sweet Violet images - check the page above then see the page below, where I have used coloured pencils to add further depth and colour to the stamped image.

And here are the final calendar pages.



As you can see, the calendar sits really well on its own and as each month passes the front card moves to the back and a new month is revealed. 


Thank you for your time in reading this long post. I hope you have found it interesting and that you might even have a go at repurposing a CD case yourelf.

As always, a list of all the products I have used (where still available) is below.

 Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog. 

AECP 2 - Final Challenge Part 1

Crafty Peeps, thank you for popping along to see me.

Today’s is a special post as it is all about the final challenge for my AECP Level 2 certification. It will be a long post so I have divided it into two sections – you can see section two, Altered/Upcycled Item, by following this link.

The challenge consists of two parts, which are:

  1. to make 4 masculine cards on the themes of Love/Thinking of You, Anniversary, Encouragement and Happy Birthday
  2. to upcycle/repurpose/alter an object.

In addition:

  • Select any 3 components from the classes in Level 1 and 2
  • Explain the components I have chosen
  • Share any design tips

My blog post must include a detailed step-by-step photo tutorial and/or YouTube video (still my nemesis, I’m afraid) and there must be a minimum of 10 photographs of the cards and project.

Not much to do then!

My first task was to decide which components I would include from the 20 classes I had taken so far. I love colour, so one of them had to be ‘In The Mood for Color’, from which I learned how colour really affects the feeling of a card and the message it sends.

Second was ‘Let It Shine’ – where would we card makers be without a bit of bling? A simple thing like adding a little sparkle can lift almost any card to the next level. It can provide an easy win when your mojo is flagging, and there are so many interesting ways to use the various shiny products in your stash.

And third I chose ‘Creative Stencilling’ because I love stencils! I love the ease with which stencils can change the feel of a whole card or project: got a climbing flower that looks a little lonely on the front of a card? Then stencil a trellis or a brick wall for it to climb up and you have instantly boosted your card to the next level.

Of course, it’s not possible to create without using elements from other classes: layering stamps, making your own backgrounds, inking tips and tricks, and much more along the way. The 20 classes have provided such a lot of brilliant tips and techniques.

My next task was to look through my Altenew collection to see what inspired me. I chose to interpret the brief as 4 cards that someone would send to a partner at different times of the year so I didn’t want to make the cards into a set, i.e. have them all look somehow related to each other.   That made it easier to pick the stamps and stencils I would use, and gave some scope for design.

Card One – Happy Birthday

The first card I made was the birthday card. I chose the ‘Aztec stencil’ for this as it is beautifully graphic and a great pattern to repeat across a card front. Using masking tape/Post-it tape, I masked off parts of the stencil as I applied ink with finger daubers for a little more control and used my favourite ink sets to apply bold colour. I was happy with the result – it really popped, as you can see.


I used Altenew Mega Alphabet dies H and B to cut out the two large letters. I also cut an additional three of each of the letters from white card and stacked these together before adding the stencilled letters on top.

Tip:

When stacking die cuts for dimension, cut the extra layers in white card, stack them together and then, before adding your top layer, take an ink pad that matches or coordinates with your top layer and ink all around the edges of the stack. There will be no white edges showing around your stack.

I originally wondered whether I should make an eclipse card but I wanted a bit more contrast between the letters and the background so I inked the stencil again with Sea Glass ink. I also cut another set of letters from gold mirror card from my stash as I wanted to offset the H and B to give a little more interest to this simple design.

Tip:

When inking/stencilling/stamping for a background like this, always ink a piece larger than you need. It allows you to pattern match with the background more easily – see below.

When I inked the stencil again in Sea Glass Ink, I made sure to ink a piece that was larger than I knew I would need in the end. The reason for this is that I wanted to match my letters to the pattern underneath, but didn’t know how much of the stencil I would need to do that. So inking a larger piece gave me options.

I added the top layer to my stack and then tried the letters against my background, making sure to line up the patterns. I lightly drew around the letters to give me placement then offset the letters against the gold card. It wasn’t until I had everything glued in place that I realised the offset was to a different side on each letter! But, go with the flow – it’s actually okay and it shines!

My final step was to stamp and heat emboss a sentiment from Sentiment Strips 2 to place across the two letters. I chose ‘Have a super day’ and embossed it in white on medium blue cardstock from my stash. A co-ordinating envelope finished this off beautifully. 

Card Two - Encouragement


My second card was the encouragement card. For this I used a combination of bright yellows and pink, with black contrast, for a happy and graphic feel. 

I first blended ‘Citrus Burst’ ink onto a 4.25” x 5.5” piece of Neenah Solar White 80lb paper with my blending brushes to give all over coverage. Then I swiped my ‘Honey Drizzle’ ink cube across the paper to leave streaks of darker yellow from side to side, for a little visual interest. I used the Sphere stencil and some Canyon ink to create some sunset interest in the centre of the panel before using the City Scene stencil and some Memento Tuxedo Black ink to lay down the city scape across the bottom of the panel. I added a second city layer in grey ink for extra depth.


I chose to extend the black area down the card to give somewhere to show a little reflection by swiping a white pigment ink pad gently downwards from what I determined was the base of the city buildings, first masking a straight line with some wide Post-it tape. 


I chose the sentiment ‘Say yes to new adventures’ as I felt this card represented something fun and new and exciting – the yellow really pops.  I stamped the sentiment in black Versamark pigment ink and heat embossed with clear powder.

A few gold crystal gems added some extra sparkle and a co-ordinating envelope finished this brightly‑coloured card. 

Card Three - Anniversary

Card number three was my anniversary card and I was excited to use my Blocks die set for the first time.


From some thin copy paper I cut three sets of blocks – because the paper was so thin I was able to layer the sheets together and cut all three sets at once. In the back of my sketchbook I worked on arranging the pieces until I had made a complete rectangle with the blocks, and I used this as my guide whilst making the card itself.

Rather than cut blocks from several different colours of cardstock, I chose to cut two complete sets of blocks from Neenah Classic Crest Solar White 100lb paper and then coloured each block using my finger daubers and Altenew inks from the Martian Terrain, Northern Shores, Natural Wonders and Pocketful of Sunshine mini ink cube sets. I cut an extra piece in gold mirror card from my stash and two further ones of the same shape in white card, which I layered with the gold for dimension. 

Using the pattern I had made as a guide (with just a couple of adjustments), I used the corner of my MISTI to help me keep the panel square as I assembled it, sticking the pieces onto a piece of copy paper to give them stability. I generated my sentiment in MS Publisher (easier placement than Word) and printed it onto 300gsm white cardstock, which I folded to make a card base. I adhered the ‘puzzle’ panel onto the card, leaving a small border of white at the top , and then attached the ‘missing’ piece on top, leaving some of the empty space visible below to give the impression that the puzzle needs to be completed.

Another co-ordinating envelope and card three was complete.

Card Four – Love/Thinking of You

The fourth and final card was on the theme of Love and, actually, I found this the most difficult to create of all the cards as I didn’t want anything too floral, too cute, too masculine, too feminine…need I go on?

Eventually I decided simply to begin and see where the process took me. I took a 6” square piece of pale red (i.e. not too saturated colour) card from a Memory Box Gradient Pad and began blending ink onto it with my blending brushes, using Velvet, Crimson and Grape crisp dye inks, until I achieved the depth and gradient I was looking for.

Then I took the Weekend Doodles stamp set and stamped the flower sprays at the bottom and up the sides of the card in Dark Chocolate ink – a little softer result than using black ink. I was not sure how to colour the flowers until I remembered my Karin Metallic Brush Pens and I found these gave a lovely sheen on top of the red ink. I did some quick colouring and then stamped the outlines again to define the flowers. 


I used the Mega Love die to cut the word twice from white cardstock and once from gold glitter paper, layering them all together for dimension. Per my tip above, I first glued the two white die cuts together and took the Dark Chocolate ink pad and swiped around the edges of the stack so that there were no white bits showing to break up the colour underneath. Then I added the final gold die cut and placed it on the card. I think perhaps I could have placed it further to the left, even if it obscured the flowers a little, as the placement bothers me slightly – but I think the overall final look is great and perhaps it’s the sort of thing that only we cardies would notice? 


I cut the word ‘You’ from gold mirror card with MFT’s Captions Alphabet Dies and added it without dimension (!) underneath the main die cut.

I added a few sparkly crystals from Lucy’s Cards and made a co-ordinating envelope, as always, to finish off.

Thank you for sticking with this long post - I really appreciate your time. Don't forget to check out part 2 here.

 Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog. 


>

01 August 2021

AECP2 – Magical Marker Techniques

Hi there, Crafty Peeps, it’s so nice to see you here.

This week’s post is another AECP submission – my penultimate Level 2 offering – and this is for the 'Magical Marker Techniques' class led by Sarah Naumann. I have been using alcohol markers for colouring for many years now (still learning, every time) but this class introduced me to techniques I’d never tried before. My submission today is inspired by the technique demonstrated in lesson 1, using alcohol markers on metal. As always, there will be a list of supplies used at the bottom of this post.

I knew I had some pewter sheet in my stash, but I didn’t want to use it for this technique as it is (1) quite heavy for a card front and (2) quite expensive! So what to do, without buying yet more supplies? Then I had an idea. I cut a piece of thinnish cardstock (only about 200 gsm/80lb weight) to 12.5 x 17.5 cm 9 (5” x 7”) and pressed it onto a sheet of Stick It adhesive, burnishing it well to the adhesive by running my bone folder over the release sheet a few times. I took a piece of aluminium cooking foil (any reasonably sturdy foil sheet will do), slightly larger than the piece of cardstock, removed the release sheet from the adhesive and gently laid the foil on top, making sure that the foil had no creases and was contacting well with the adhesive. 

Tip

Take care when pressing down onto the adhesive – the foil can mark or tear quite easily. I popped the release paper back on top of the foil and checked that my hands were clean before gently but firmly rubbing over the top to help the adhesion. 

I trimmed the foil down to the size of the cardstock and this gave me a piece of metal foil on which to work.

I took the 'Dahlia Stencil Layer A' from the 'Layered Dahlia A & B Stencil Bundle' (you can buy the stencils separately, if you prefer) and placed this over the metal foil, securing with some tape on the top only. I ran this through my die cutting machine with the embossing plates (and some shims, to get the result I wanted). This gave me a slightly raised pattern on which to use my alcohol markers.

Keeping the stencil taped in place, I flipped it up and got to work on the colouring. Alcohol markers don’t cover smoothly on metal and you will see the brush strokes at this stage. Don’t worry, though, this won’t affect the final result.

I coloured the blooms and leaves with two colours of marker each, and filled in the ‘empty’ space with pale blue. Although it is better to use strong colours for this technique, this pale blue does offer a little colour rather than leaving these spaces silver. This is how the panel looked at this point, with the stencil flipped back down over the coloured metal.

Next comes the exciting bit. With the stencil in place over the coloured panel, I used a fine spray of isopropyl alcohol over the whole piece. A few seconds elapsed when I thought maybe it hadn’t worked then suddenly…the colour broke up into the most beautiful little pools. 

I removed the stencil and let the panel dry for a few minutes before trimming the edges down. However, they still looked a little ragged (the downside of using foil and not metal sheet) so I cut a frame from white cardstock and used this to cover the edges of the panel for neatness. I didn't photograph at this stage, unfortunately, but this is what the panel looked like without the border:

I wasn’t sure how to make this background into a card but my OH suggested that I use some watercolour to mimic the effect on paper. I smushed some Distress Ink colours ('Mustard Seed', 'Spiced Marmalade', 'Speckled Egg' and 'Barn Door') onto a silicone mat and picked them up with my water brush, using a wet-on-wet technique to apply colour to the edges of a square of watercolour paper. To finish I used the end my Altenew 'Pure White Ink Spray' applicator tube to apply some white splatter.

I popped up the coloured panel on some craft foam and added it to the watercoloured panel before applying this to a 17 cm (6.5”) square card blank.

This is an amazing technique and the results are really interesting. Why not give it a try and post your results to the Altenew Fan Group Facebook page? Not a member yet? I can recommend it – there are some very talented Altenewers and some amazing cards.

I hope you have enjoyed this post – why not leave a comment to let me know you’ve visited?

 Until next time, stay safe and keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog. 

07 July 2021

AECP 2 - With a Twist

Hello Crafty Peeps, and welcome back to my corner of Blogland.

Before I start, just a warning that this is a long post, with five card descriptions.

Today's post is another AECP Level 2 submission, based on Therese Calvird's class 'With a Twist'. In this class, Therese demonstrates several ways to take an alternative look at the supplies in your stash, with new ideas for getting more out of your current supplies. It is a useful exercise and a lot of fun, too!

Whilst Therese's projects use Altenew's stamps, I chose to use a layering stencil for my submission and one of my favourites is the new 'Polka Dot Buds' two-layer stencil. As you will see, the stencil is split into two parts - the large, regular polka dot pattern and the leaf and small polka dot pattern. I thought it would be fun to use the two layers not only together but separately to see what results I could get. 

A list of all the supplies I used (for those I know, at least) is at the end of this post, as usual. 

Card One

For this card I used the stencil in its intended form. I used inks from my stash - mostly Lawn Fawn and Nuvo - as my Altenew inks have been used so much they are drying and need to be reinked. I love the sunflower vibe from the bright orange and green. 


The only 'twist' I put on this card was to cut out a square in the middle to frame the sentiment, which comes from a Simon Says Stamp set called 'XL  Greetings 2 - All the Feels'. I used a little frame die from my stash (which I think might have been a freebie, along the way) to cut the square, and used the narrow frame around the sentiment. 

This is a 6" x 6" (15cm x 15cm) card base and I cut down the stencilled image a little smaller to leave a narrow white border around the card.

I popped up the outer frame on some fun foam for dimension, and made a co-ordinating envelope to finish. 

Card Two

Originally I was going to simply use the stencil with a different colour way, and the result was quite lovely. But I had an idea to mimic the flower shape to add to the card, and this is what happened!


Apologies for the photography - I didn't get decent shots because this card was rushing out of the door to its recipient! The blues are quite vibrant in real life.

Again, I used a little frame die (part of the same set I used for card one) to cut out the centre, and the same stamp set for the sentiment. I popped up the outer frame on some fun foam for dimension and used the little frame around the sentiment on the card front. I added some Nuvo Crystal drops in 'Caribbean Ocean' around the sentiment and some 'Sea Breeze' Nuvo Jewel drops around the flower centres. 

I am on the bench about this card - perhaps it would have worked better if the flowers I made had been a little smaller.

Card Three

For this card I used only the leaves and small polka dot layer of the stencil. I inked the leaves in the intended direction in a darker green ink, and added the dots in a dark grey. Then I turned the stencil around, lined up the 'stalks' and then inked the leaves again in a lighter green.


I had the feeling of wings when I looked at the finished pattern, so I heat embossed a little butterfly onto vellum as the only embellishment for the card. The stamp was from the Concord & 9th 'Bold Butterflies' set and I inked it in black then embossed it with a holographic powder from my stash.

Using the same sentiment stamp set I stamped 'Thinking of you' in simple black on white. I die cut the sentiment and then also die cut again three times from white card, inking up the edges with the colours of ink I had used, and offsetting each layer behind the sentiment for an extra detail. 

Card Four

I thought the solid shapes in this stencil would lend themselves to heat embossing, so that was the focus for my next card. I rarely use black for my backgrounds, so this was an opportunity to do something completely different. 


I used Altenew's gold pigment inks - 'Enchanted Gold' for the large polka dots and 'Antique Gold' for the leaves - and laid down a solid layer through each layer of the stencil with a foam applicator. I then used clear embossing powder to set the ink and preserve the two colours of gold.

All this card needed was a simple, bold sentiment - I used Simon Says Stamp 'You Shine' die and cut this from gold mirror card. I also cut three small stars from the same cardstock, to act as little highlights.

A pale gold envelope finished off this striking card - I'm really pleased with the end result. 

Card Five

My final card in this set uses only the large polka dot layer of the stencil and I used Altenew's 'Martian Terrain' ink set to ink an ombre background.


I created flowers and leaves using Altenew's 'Craft-A-Flower: Cistus Layering Die Set' in co-ordinating colours, with pops of gold. I also cut additional leaves from vellum using Altenew's 'Leaf Mix' die set, and used a die cut frame that I had left over from another project. I played around with the elements until I had an arrangement I was pleased with and then stuck everything down, using foam dots to lift the centre flower for dimension.

I used a scrap of orange cardstock and gold embossed a sentiment from Avery Elles' 'Banner Bits' sentiments stamp set to finish.

Well, that's it, five very different ways to use the same stencil - I think that's quite a twist, isn't it? And not a single sequin in sight!

Thank you for your time, Peeps. Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog.