Showing posts with label Heat embossing. Show all posts
Showing posts with label Heat embossing. Show all posts

25 July 2021

AECP 2 - Impressive Heat Embossing

Hello Crafty Peeps, and thank you for stopping by. 

It has been a strange couple of weeks, but I'm pleased to say that I'm back on track and feeling creative again. I had a fight with a scalpel about 3 weeks ago and damaged my left index finger. In itself that wasn't a problem, as I am right-handed, but trying to do anything with a bandaged finger is inconvenient at best. Thankfully, I have healed quickly and well and am no longer waving around a big white digit! I  had exactly the same accident and injured the same finger 20 years ago, just before Christmas, and my big white finger was a great source of amusement when conducting our work's choir at our carol concert!

Today I'm posting my submission for the AECP class 'Impressive Heat Embossing', in which Svetlana Marchenko introduces us to some of the many ways we can use heat embossing to take our cards to the next level. This card is my interpretation of lesson 4 - Layered Heat Embossing - and I've used the 'Vintage Roses' layering stamp set for this.

As always, there will be a full list of the supplies used at the bottom of this post.


To begin, I heat embossed the 'Shine Like a Diamond' background stamp in gold onto a 6" (15cm) square piece of Neenah Classic Crest Solar White 80lb cardstock - I find that the 80lb warps less than the heavier 110lb when embossing a full background.  I trimmed to the edges of the stamped background and layered the panel with a piece of textured gold cardstock from my stash, before adding to a 6" square card blank. 

Next, I wanted to use heat embossing to create an embellishment for the centre of the card, and decided that a number 40 would work well. I cut the numbers from some 300 gsm white card (stash) and pressed my Wow Embossing Ink pad over both numbers, coating them well. I then heat embossed with a layer of ordinary clear embossing powder. Once this had cooled, I inked the numbers again and this time coated them with a layer of Wow 'Clear Gloss Ultra High' embossing powder, which melted to a thicker layer of clear. While this was still hot I sprinkled another layer of embossing powder, to build up the thickness of the numbers. Again, while this was still hot, I liberally sprinkled with gold embossing powder, which melted as the top layer of a nicely thick pair of numbers.

Tip

I advise working on a silicone mat, or something similar (I often use an oven liner sheet - see below) whilst working in this way, as the embossing powder around the object will also melt and will stick to paper, making it more difficult to remove the finished object. Once the first layer has melted, make sure that either your heat gun is on its lowest setting, or that you move the heat slightly away so that the embossing stays liquid but does not burn. If you need to clean up the edges of the finished object, either gently rub around it with your finger (once cooled, of course) or remove to a clean space of your silicone/heat mat and gently heat again and the edges should melt cleanly,

For the flowers, I stamped three of the smaller and two of the larger flowers, using the 'Martian Terrain' set of inks, which I love. For the last layer, I used an embossing ink and then heat embossed with gold, to give a little sparkle. I think it's a lovely way to add something different to an image. I don't have the matching dies for this set, although they are available, so it was fussy cutting time.

I stamped the leaves from the set using the 'Nature's Wonders' ink set, another firm favourite. The sentiment is from the 'Sentiment Strips 2' stamp set - this set is great for useful 'everyday' greetings. 

The arrangement is fairly simple, with a couple of the flowers popped up on foam squares for a little dimension. And there are sequins, of course, from Lucy's.


So there's the final card - I hope you like it. 

Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog. 

07 July 2021

AECP 2 - With a Twist

Hello Crafty Peeps, and welcome back to my corner of Blogland.

Before I start, just a warning that this is a long post, with five card descriptions.

Today's post is another AECP Level 2 submission, based on Therese Calvird's class 'With a Twist'. In this class, Therese demonstrates several ways to take an alternative look at the supplies in your stash, with new ideas for getting more out of your current supplies. It is a useful exercise and a lot of fun, too!

Whilst Therese's projects use Altenew's stamps, I chose to use a layering stencil for my submission and one of my favourites is the new 'Polka Dot Buds' two-layer stencil. As you will see, the stencil is split into two parts - the large, regular polka dot pattern and the leaf and small polka dot pattern. I thought it would be fun to use the two layers not only together but separately to see what results I could get. 

A list of all the supplies I used (for those I know, at least) is at the end of this post, as usual. 

Card One

For this card I used the stencil in its intended form. I used inks from my stash - mostly Lawn Fawn and Nuvo - as my Altenew inks have been used so much they are drying and need to be reinked. I love the sunflower vibe from the bright orange and green. 


The only 'twist' I put on this card was to cut out a square in the middle to frame the sentiment, which comes from a Simon Says Stamp set called 'XL  Greetings 2 - All the Feels'. I used a little frame die from my stash (which I think might have been a freebie, along the way) to cut the square, and used the narrow frame around the sentiment. 

This is a 6" x 6" (15cm x 15cm) card base and I cut down the stencilled image a little smaller to leave a narrow white border around the card.

I popped up the outer frame on some fun foam for dimension, and made a co-ordinating envelope to finish. 

Card Two

Originally I was going to simply use the stencil with a different colour way, and the result was quite lovely. But I had an idea to mimic the flower shape to add to the card, and this is what happened!


Apologies for the photography - I didn't get decent shots because this card was rushing out of the door to its recipient! The blues are quite vibrant in real life.

Again, I used a little frame die (part of the same set I used for card one) to cut out the centre, and the same stamp set for the sentiment. I popped up the outer frame on some fun foam for dimension and used the little frame around the sentiment on the card front. I added some Nuvo Crystal drops in 'Caribbean Ocean' around the sentiment and some 'Sea Breeze' Nuvo Jewel drops around the flower centres. 

I am on the bench about this card - perhaps it would have worked better if the flowers I made had been a little smaller.

Card Three

For this card I used only the leaves and small polka dot layer of the stencil. I inked the leaves in the intended direction in a darker green ink, and added the dots in a dark grey. Then I turned the stencil around, lined up the 'stalks' and then inked the leaves again in a lighter green.


I had the feeling of wings when I looked at the finished pattern, so I heat embossed a little butterfly onto vellum as the only embellishment for the card. The stamp was from the Concord & 9th 'Bold Butterflies' set and I inked it in black then embossed it with a holographic powder from my stash.

Using the same sentiment stamp set I stamped 'Thinking of you' in simple black on white. I die cut the sentiment and then also die cut again three times from white card, inking up the edges with the colours of ink I had used, and offsetting each layer behind the sentiment for an extra detail. 

Card Four

I thought the solid shapes in this stencil would lend themselves to heat embossing, so that was the focus for my next card. I rarely use black for my backgrounds, so this was an opportunity to do something completely different. 


I used Altenew's gold pigment inks - 'Enchanted Gold' for the large polka dots and 'Antique Gold' for the leaves - and laid down a solid layer through each layer of the stencil with a foam applicator. I then used clear embossing powder to set the ink and preserve the two colours of gold.

All this card needed was a simple, bold sentiment - I used Simon Says Stamp 'You Shine' die and cut this from gold mirror card. I also cut three small stars from the same cardstock, to act as little highlights.

A pale gold envelope finished off this striking card - I'm really pleased with the end result. 

Card Five

My final card in this set uses only the large polka dot layer of the stencil and I used Altenew's 'Martian Terrain' ink set to ink an ombre background.


I created flowers and leaves using Altenew's 'Craft-A-Flower: Cistus Layering Die Set' in co-ordinating colours, with pops of gold. I also cut additional leaves from vellum using Altenew's 'Leaf Mix' die set, and used a die cut frame that I had left over from another project. I played around with the elements until I had an arrangement I was pleased with and then stuck everything down, using foam dots to lift the centre flower for dimension.

I used a scrap of orange cardstock and gold embossed a sentiment from Avery Elles' 'Banner Bits' sentiments stamp set to finish.

Well, that's it, five very different ways to use the same stencil - I think that's quite a twist, isn't it? And not a single sequin in sight!

Thank you for your time, Peeps. Until next time, keep crafting.




Supplies:

Please note that some of the links below are affiliate links and if you follow them and make a purchase I might receive a small commission, at no additional cost to you. This helps to support my blog.

13 October 2020

AECP 1 - All About Layering 2

Happy Wednesday crafty peeps, and thank you for stopping by. Today's post is my submission for the second layering class at Altenew, as part of my AECP journey. This is another free class (you can find it here) full of great instruction and inspiration for using more of Altenew's layering stamp sets. 

There are two cards for this class and I hope you'll agree that they demonstrate the lovely layering of the Build A Flower Rose stamp set and the Kind Reminders stamp and colouring stencil set. 

Card One - Build A Flower Rose


I love the Build A Flower sets. The layering results in a beautiful flower, whichever set you choose, and the matching die(s) makes cutting out a breeze! There are six layers to the rose in this set, giving real depth to the flower. And it looks stunning in any colour. 

I've also used the Pattern Play Diamond background stamp, heat embossed with white embossing powder to give a subtle texture to the base of the card.


As you can see, my ink choices were not all traditional. I wanted to introduce some interest by using an unusual colour in the leaves, to lift the pink and green. I list all the inks I used below.


The sentiment is from the same stamp set, and I stamped it with Versafine black ink. 

A few white sequins from my stash added the final touch.

Card Two - Kind Reminders Set



This is another of my favourite sets - I love colouring with the layered stencils. I've listed the inks used below. 

I stamped and coloured the pink flower directly onto the card base. The orange and yellow blooms were stamped and coloured separately then cut out and mounted on the card, the yellow flower on 3D foam pads for dimension. 

For the background I masked the flower and used Altenew's Grid Stencil to give some interest. The stencil is inked with Mountain Mist ink for a pleasing contrast with the vibrant pinks and yellows of the blooms. 

The addition of a few Blushing Red Nuvo drops and a striking red envelope, stamped with Versafine ink, completes the card. 

Build A Flower Rose 
Flowers: Blush, Rouge, Coral Bliss, Velvet, Coral Berry, Grapevine 
Green leaves: Bamboo, Olive
Blue leaves: Dew Drops, Ocean Wave, Dark Night

Kind Reminders:
Flowers: Fresh Lemon, Honey Drizzle, Coral Bliss, Vineyard Berry, Sunkissed, Orange Cream, Dark Chocolate
Leaves: Parrot, Bamboo, Olive, Moss

Thank you for reading - I hope you enjoyed this submission. If you would like to see some more of my work, you can find me on Instagram and Facebook @PeriMadeIt, or if you would like to follow this blog, scroll to the bottom to hop over to the web version, where you will find a follow button at the bottom of the page.

Until next time, stay safe and keep crafting.

Peri x

07 October 2020

AECP 1 - All About Layering 1

Happy Wednesday, crafty peeps! Today I have another of my AECP submissions, for the All About Layering 1 class.

Altenew are particularly well known for their beautiful layering stamps and this class is the first of five FREE classes designed to help you learn how to get great results every time. Every class comprises several lessons, each showcasing a different stamp set, demonstrating the layering technique and offering inspiration for your cardmaking. I recommend checking out these classes, particularly if you are new to layering stamps - you can find this first class here.

For this class I decided to use the same stamp set in different colourways for a pair of cards for twin friends of ours. I chose the Celebrate Us stamp set (a collaboration between Altenew and Pink Fresh Studio), together with the Deco Wallpaper stencil, and a variety of Altenew inks in yellows and peaches (see list below).

I also used a few additional solid layer leaf sprays from the Build A Flower Rose stamp set.

I began by preparing two card bases using the stencil with Misty Morning ink, for a light but interesting background. I used one of these backgrounds 'upside down' to add another point of difference between these two similar cards.

I stamped the flowers six times, three for each card, and followed the layering guide on the back of the stamp packet to stamp the layers. 

Although there is a matching die available for this stamp set, I don't have it yet, so I fussy cut the images with scissors, right on the black stamped line. 

I assembled both cards, letting some of the large images fall over the sides of the card base. I trimmed off the excess and used the trimmings to fill in around the sides of the card. I also stamped the first solid layer of leaves from the Build A Flower Rose set, to give me some extra foliage for the layout, adding some detail to the leaves with a black fineliner pen. 

I popped up the centre flower on each card with some 3D foam squares, to give some dimension.

For the sentiment I used MFT's Scripty Smile Die-namics, which I believe is now retired. For the peach card I cut two from brown card and one from copper card and glued these together to give a thicker die cut word. I repeated this in gold, with additional layers in white, for the yellow card. I lost my tittles (the little dot over the 'i') so I substituted some Nuvo Crystal Drops in Copper Penny and English Mustard, as you can see. 

I finished off with a further sentiment from Avery Elle's Banner Bits stamp set.


Pink Pearl, Rouge, Warm Sunshine and Firefly
Citrus Burst, Maple Yellow, Orange Cream and Parrot 

Thank you for your time - I really appreciate you stopping by. Why not leave a comment to let me know you were here? 

Until next time, happy crafting.
Peri x